MonoToStereo (left_channel_clip, right_channel_clip)
Converts two mono signals to one stereo signal. This can be used, if one or both channels has been modified seperately, and then has to be recombined.
The two clips has to have audio at the same sample rates (Use ResampleAudioif this is a problem.) If either of the sources is in stereo, the signal will be taken from the corresponding channel (left channel from the left_channel_clip, and vice versa for right channel).
Before merging audio is converted to the sample type of the left_channel_clip.
In v2.5 this function is simply mapped to MergeChannels.
#Combines two seperate wave sources to a stereo signal:
left_channel = WavSource("c:\left_channel.wav")
right_channel = WavSource("c:\right_channel.wav")
return MonoToStereo(left_channel, right_channel)
$Date: 2004/03/09 21:28:07 $